| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376 | /***************************************************************************//** *   @file   ST7579.c *   @brief  Implementation of ST7579 Driver. *   @author DBogdan (dragos.bogdan@analog.com)******************************************************************************** * Copyright 2012(c) Analog Devices, Inc. * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: *  - Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. *  - Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in *    the documentation and/or other materials provided with the *    distribution. *  - Neither the name of Analog Devices, Inc. nor the names of its *    contributors may be used to endorse or promote products derived *    from this software without specific prior written permission. *  - The use of this software may or may not infringe the patent rights *    of one or more patent holders.  This license does not release you *    from the requirement that you obtain separate licenses from these *    patent holders to use this software. *  - Use of the software either in source or binary form, must be run *    on or directly connected to an Analog Devices Inc. component. * * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ********************************************************************************* *   SVN Revision: 499*******************************************************************************//******************************************************************************//* Include Files                                                              *//******************************************************************************/#include "Communication.h"	// Communication definitions.#include "ST7579.h"			// ST7579 definitions./******************************************************************************//* Private variables                                                          *//******************************************************************************/const unsigned char st7579Font[95][5] ={	{ 0x00, 0x00, 0x00, 0x00, 0x00 },	// sp	{ 0x00, 0x00, 0x2f, 0x00, 0x00 },	// !	{ 0x00, 0x07, 0x00, 0x07, 0x00 },	// "	{ 0x14, 0x7f, 0x14, 0x7f, 0x14 },	// #	{ 0x24, 0x2a, 0x7f, 0x2a, 0x12 },	// $	{ 0xc4, 0xc8, 0x10, 0x26, 0x46 },	// %	{ 0x36, 0x49, 0x55, 0x22, 0x50 },	// &	{ 0x00, 0x05, 0x03, 0x00, 0x00 },	// '	{ 0x00, 0x1c, 0x22, 0x41, 0x00 },	// (	{ 0x00, 0x41, 0x22, 0x1c, 0x00 },	// )	{ 0x14, 0x08, 0x3E, 0x08, 0x14 },	// *	{ 0x08, 0x08, 0x3E, 0x08, 0x08 },	// +	{ 0x00, 0x00, 0x50, 0x30, 0x00 },	// ,	{ 0x10, 0x10, 0x10, 0x10, 0x10 },	// -	{ 0x00, 0x60, 0x60, 0x00, 0x00 },	// .	{ 0x20, 0x10, 0x08, 0x04, 0x02 },	// /	{ 0x3E, 0x51, 0x49, 0x45, 0x3E },	// 0	{ 0x00, 0x42, 0x7F, 0x40, 0x00 },	// 1	{ 0x42, 0x61, 0x51, 0x49, 0x46 },	// 2	{ 0x21, 0x41, 0x45, 0x4B, 0x31 },	// 3	{ 0x18, 0x14, 0x12, 0x7F, 0x10 },	// 4	{ 0x27, 0x45, 0x45, 0x45, 0x39 },	// 5	{ 0x3C, 0x4A, 0x49, 0x49, 0x30 },	// 6	{ 0x01, 0x71, 0x09, 0x05, 0x03 },	// 7	{ 0x36, 0x49, 0x49, 0x49, 0x36 },	// 8	{ 0x06, 0x49, 0x49, 0x29, 0x1E },	// 9	{ 0x00, 0x36, 0x36, 0x00, 0x00 },	// :	{ 0x00, 0x56, 0x36, 0x00, 0x00 },	// ;	{ 0x08, 0x14, 0x22, 0x41, 0x00 },	// <	{ 0x14, 0x14, 0x14, 0x14, 0x14 },	// =	{ 0x00, 0x41, 0x22, 0x14, 0x08 },	// >	{ 0x02, 0x01, 0x51, 0x09, 0x06 },	// ?	{ 0x32, 0x49, 0x59, 0x51, 0x3E },	// @	{ 0x7E, 0x11, 0x11, 0x11, 0x7E },	// A	{ 0x7F, 0x49, 0x49, 0x49, 0x36 },	// B	{ 0x3E, 0x41, 0x41, 0x41, 0x22 },	// C	{ 0x7F, 0x41, 0x41, 0x22, 0x1C },	// D	{ 0x7F, 0x49, 0x49, 0x49, 0x41 },	// E	{ 0x7F, 0x09, 0x09, 0x09, 0x01 },	// F	{ 0x3E, 0x41, 0x49, 0x49, 0x7A },	// G	{ 0x7F, 0x08, 0x08, 0x08, 0x7F },	// H	{ 0x00, 0x41, 0x7F, 0x41, 0x00 },	// I	{ 0x20, 0x40, 0x41, 0x3F, 0x01 },	// J	{ 0x7F, 0x08, 0x14, 0x22, 0x41 },	// K	{ 0x7F, 0x40, 0x40, 0x40, 0x40 },	// L	{ 0x7F, 0x02, 0x0C, 0x02, 0x7F },	// M	{ 0x7F, 0x04, 0x08, 0x10, 0x7F },	// N	{ 0x3E, 0x41, 0x41, 0x41, 0x3E },	// O	{ 0x7F, 0x09, 0x09, 0x09, 0x06 },	// P	{ 0x3E, 0x41, 0x51, 0x21, 0x5E },	// Q	{ 0x7F, 0x09, 0x19, 0x29, 0x46 },	// R	{ 0x46, 0x49, 0x49, 0x49, 0x31 },	// S	{ 0x01, 0x01, 0x7F, 0x01, 0x01 },	// T	{ 0x3F, 0x40, 0x40, 0x40, 0x3F },	// U	{ 0x1F, 0x20, 0x40, 0x20, 0x1F },	// V	{ 0x3F, 0x40, 0x38, 0x40, 0x3F },	// W	{ 0x63, 0x14, 0x08, 0x14, 0x63 },	// X	{ 0x07, 0x08, 0x70, 0x08, 0x07 },	// Y	{ 0x61, 0x51, 0x49, 0x45, 0x43 },	// Z	{ 0x00, 0x7F, 0x41, 0x41, 0x00 },	// [	{ 0x55, 0x2A, 0x55, 0x2A, 0x55 },	// /	{ 0x00, 0x41, 0x41, 0x7F, 0x00 },	// ]	{ 0x04, 0x02, 0x01, 0x02, 0x04 },	// ^	{ 0x40, 0x40, 0x40, 0x40, 0x40 },	// _	{ 0x00, 0x01, 0x02, 0x04, 0x00 },	// '	{ 0x20, 0x54, 0x54, 0x54, 0x78 },	// a	{ 0x7F, 0x48, 0x44, 0x44, 0x38 },	// b	{ 0x38, 0x44, 0x44, 0x44, 0x20 },	// c	{ 0x38, 0x44, 0x44, 0x48, 0x7F },	// d	{ 0x38, 0x54, 0x54, 0x54, 0x18 },	// e	{ 0x08, 0x7E, 0x09, 0x01, 0x02 },	// f	{ 0x0C, 0x52, 0x52, 0x52, 0x3E },	// g	{ 0x7F, 0x08, 0x04, 0x04, 0x78 },	// h	{ 0x00, 0x44, 0x7D, 0x40, 0x00 },	// i	{ 0x20, 0x40, 0x44, 0x3D, 0x00 },	// j	{ 0x7F, 0x10, 0x28, 0x44, 0x00 },	// k	{ 0x00, 0x41, 0x7F, 0x40, 0x00 },	// l	{ 0x7C, 0x04, 0x18, 0x04, 0x78 },	// m	{ 0x7C, 0x08, 0x04, 0x04, 0x78 },	// n	{ 0x38, 0x44, 0x44, 0x44, 0x38 },	// o	{ 0x7C, 0x14, 0x14, 0x14, 0x08 },	// p	{ 0x08, 0x14, 0x14, 0x18, 0x7C },	// q	{ 0x7C, 0x08, 0x04, 0x04, 0x08 },	// r	{ 0x48, 0x54, 0x54, 0x54, 0x20 },	// s	{ 0x04, 0x3F, 0x44, 0x40, 0x20 },	// t	{ 0x3C, 0x40, 0x40, 0x20, 0x7C },	// u	{ 0x1C, 0x20, 0x40, 0x20, 0x1C },	// v	{ 0x3C, 0x40, 0x30, 0x40, 0x3C },	// w	{ 0x44, 0x28, 0x10, 0x28, 0x44 },	// x	{ 0x0C, 0x50, 0x50, 0x50, 0x3C },	// y	{ 0x44, 0x64, 0x54, 0x4C, 0x44 },	// z	{ 0x08, 0x3e, 0x41, 0x41, 0x00 },	// { 	{ 0x00, 0x00, 0x77, 0x00, 0x00 },	// | 	{ 0x00, 0x41, 0x41, 0x3e, 0x08 },	// } 	{ 0x02, 0x01, 0x02, 0x01, 0x00 }	// ~};/***************************************************************************//** * @brief Transmits 8 bits to ST7579 controller. * * @param data - data to transmit. * * @return None.*******************************************************************************/void ST7579_WriteByte(unsigned char data){    unsigned char spiWord[2]    = {0};    spiWord[0] = 0x02;    spiWord[1] = data;	SPI_Write(spiWord,1);}/***************************************************************************//** * @brief Initializes the ST7579 controller. * * @param None. * * @return None.*******************************************************************************/unsigned char ST7579_Init(void){	unsigned char status  = 0x0;	status = SPI_Init(0, 1000000, 1, 1);	ST7579_RS_PIN_OUT;	ST7579_RS_LOW;	/* Select LCD bias ratio of the voltage required for driving the LCD. */	ST7579_WriteByte(0x21);	ST7579_WriteByte(0x16);	/* Select Booster efficiency and Booster stage. */	ST7579_WriteByte(0x23);	ST7579_WriteByte(0x99);	/* Set V0 Range. */	ST7579_WriteByte(0x20);		ST7579_WriteByte(0x04);	/* 50 ms delay is recommended. */	/* Set the frame frequency */	ST7579_WriteByte(0x23);	ST7579_WriteByte(0x0C);	/* Set V0. */	ST7579_WriteByte(0x21);		ST7579_WriteByte(0xE7);	/* Select the display mode */	ST7579_WriteByte(0x20);	ST7579_WriteByte(0x0C);	ST7579_RS_HIGH;	/* Clear RAM. */	ST7579_Clear();	return(status);}/***************************************************************************//** * @brief Clears ST7579 RAM. * * @param None. * * @return None.*******************************************************************************/void ST7579_Clear(void){	unsigned short clearPosition;	unsigned char yPosition = 0x0;		for(clearPosition = 0;clearPosition < (64 * 96);clearPosition ++)	{		if(!(clearPosition % 96))		{			ST7579_RS_LOW;			/* Set X address of RAM. */			ST7579_WriteByte(0x28);			ST7579_WriteByte(0x80);			/* Set Y address of RAM. */			ST7579_WriteByte(0x28);			ST7579_WriteByte(0x40 + yPosition);			yPosition ++;			ST7579_RS_HIGH;		}		ST7579_WriteByte(0x00);	}}/***************************************************************************//** * @brief Sends a character to ST7579 controller. * * @param yPosition - Y address of RAM. * @param xPosition - X address of RAM. * @param character - The character. * * @return None.*******************************************************************************/void ST7579_Char(unsigned char yPosition,                 unsigned char xPosition,                 unsigned char character){	volatile unsigned char column;	ST7579_RS_LOW;	/* Set X address of RAM. */	ST7579_WriteByte(0x28);	ST7579_WriteByte(0x80 + xPosition);	/* Set Y address of RAM. */	ST7579_WriteByte(0x28);	ST7579_WriteByte(0x40 + yPosition);	ST7579_RS_HIGH;	/* Send character data. */	for(column = 0;column < 5;column ++)	{		ST7579_WriteByte(st7579Font[character - 32][column] << 1);	}	ST7579_WriteByte(0x00);}/***************************************************************************//** * @brief Sends a string to ST7579 controller. * * @param yPosition - Y address of RAM. * @param xPosition - X address of RAM. * @param string - The string. * * @return None.*******************************************************************************/void ST7579_String(unsigned char yPosition,                   unsigned char xPosition,                   unsigned char* string){	while(*string)	{		/* Send each character of the string. */		ST7579_Char(yPosition, xPosition, *string++);		xPosition += 6;	}}/***************************************************************************//** * @brief Sends an integer number to ST7579 controller. * * @param yPosition - Y address of RAM. * @param xPosition - X address of RAM. * @param number - The number. * @param chNumber - Number of characters. * * @return None.*******************************************************************************/void ST7579_Number(unsigned char yPosition,                   unsigned char xPosition,                   unsigned long number,                   unsigned char chNumber){	while(chNumber--)	{		ST7579_Char(yPosition, xPosition, (number % 10) + 0x30);		xPosition -= 6;		number = number / 10;	}}/***************************************************************************//** * @brief Sends an integer number in Hexa format to ST7579 controller. * * @param yPosition - Y address of RAM. * @param xPosition - X address of RAM. * @param number - The number. * @param bytesNumber - Number of bytes. * * @return None.*******************************************************************************/void ST7579_HexNumber(unsigned char yPosition,					  unsigned char xPosition,					  unsigned long number,                      unsigned char bytesNumber){	char character = 0;    bytesNumber *= 2;	while(bytesNumber--)	{		character = (number % 16);		if (character <= 9)		{			character += 0x30;		}		else		{			character +=0x37;		}		ST7579_Char(yPosition, xPosition, character);		xPosition -= 6;		number = number / 16;	}}/***************************************************************************//** * @brief Sends an image array to ST7579 controller. * * @param yPosition - Y address of RAM. * @param xPosition - X address of RAM. * @param image - The image array. * @param width - The width of the image (pixels). * @param height - The height of the image (pixels). * * @return None.*******************************************************************************/void ST7579_Image(unsigned char yPosition,                  unsigned char xPosition,                  const unsigned char image[],                  unsigned char width,                  unsigned char height){	unsigned short index;	for(index = 0;index < (width * height / 8);index ++)	{		if(!(index % width))		{			ST7579_RS_LOW;			/* Set X address of RAM. */			ST7579_WriteByte(0x28);			ST7579_WriteByte(0x80 + xPosition);			/* Set Y address of RAM. */			ST7579_WriteByte(0x28);			ST7579_WriteByte(0x40 + yPosition);			yPosition ++;			ST7579_RS_HIGH;		}		ST7579_WriteByte(image[index]);	}}
 |