/**
******************************************************************************
* @file lwipopts.h
* @author MCD Application Team
* @version V1.0.0
* @date 31-October-2011
* @brief lwIP Options Configuration.
* This file is based on Utilities\lwip_v1.3.2\src\include\lwip\opt.h
* and contains the lwIP configuration for the STM32F4x7 demonstration.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
#ifndef __LWIPOPTS_H__
#define __LWIPOPTS_H__
/**
* SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
* critical regions during buffer allocation, deallocation and memory
* allocation and deallocation.
*/
#define SYS_LIGHTWEIGHT_PROT 1
#define ETHARP_TRUST_IP_MAC 0
#define IP_REASSEMBLY 0
#define IP_FRAG 0
#define ARP_QUEUEING 0
/**
* NO_SYS==1: Provides VERY minimal functionality. Otherwise,
* use lwIP facilities.
*/
#define NO_SYS 0
/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
byte alignment -> define MEM_ALIGNMENT to 2. */
#define MEM_ALIGNMENT 4
/* MEM_SIZE: the size of the heap memory. If the application will send
a lot of data that needs tьщтo be copied, this should be set high. */
#define MEM_SIZE (10*1024)
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
sends a lot of data out of ROM (or other static memory), this
should be set high. */
#define MEMP_NUM_PBUF 50 // было
//#define MEMP_NUM_PBUF 20 // тест
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
per active UDP "connection". */
#define MEMP_NUM_UDP_PCB 6
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
connections. */
#define MEMP_NUM_TCP_PCB 12 // было
//#define MEMP_NUM_TCP_PCB 80
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
connections. */
#define MEMP_NUM_TCP_PCB_LISTEN 5
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
segments. */
#define MEMP_NUM_TCP_SEG 25 // было
//#define MEMP_NUM_TCP_SEG 50
/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
timeouts. */
#define MEMP_NUM_SYS_TIMEOUT 10
/**
* MEMP_NUM_NETCONN: the number of struct netconns.
* (only needed if you use the sequential API, like api_lib.c)
*/
#define MEMP_NUM_NETCONN 10
/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
#define PBUF_POOL_SIZE 25
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
#define PBUF_POOL_BUFSIZE 1540 // было
//#define PBUF_POOL_BUFSIZE 2048 // тесты
/**
* MEMP_NUM_NETBUF: the number of struct netbufs.
* (only needed if you use the sequential API, like api_lib.c)
*/
#define MEMP_NUM_NETBUF 7
#define TCP_LISTEN_BACKLOG 1
/* ---------- TCP options ---------- */
#define LWIP_TCP 1
#define TCP_TTL 255
/* Controls if TCP should queue segments that arrive out of
order. Define to 0 if your device is low on memory. */
#define TCP_QUEUE_OOSEQ 0
/* TCP Maximum segment size. */
#define TCP_MSS 1400//(1500 - 40) /* TCP_MSS = (Ethernet MTU - IP header size - TCP header size) */
/* TCP sender buffer space (bytes). */
//#define TCP_SND_BUF (5*TCP_MSS)
//#define TCP_SND_BUF (18*TCP_MSS)
#define TCP_SND_BUF (18*TCP_MSS)
/* TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. */
//20
#define TCP_SND_QUEUELEN (4* TCP_SND_BUF/TCP_MSS)
//#define TCP_SND_QUEUELEN (4* TCP_SND_BUF/TCP_MSS)
/* TCP receive window. */
#define TCP_WND (4*TCP_MSS)
/**
* TCP_MAXRTX: Maximum number of retransmissions of data segments.
*/
#define TCP_MAXRTX 6
/* ---------- ICMP options ---------- */
#define LWIP_ICMP 1
//#define ICMP_TTL 128
/* ---------- DHCP options ---------- */
/* Define LWIP_DHCP to 1 if you want DHCP configuration of
interfaces. DHCP is not implemented in lwIP 0.5.1, however, so
turning this on does currently not work. */
#define LWIP_DHCP 1
// ---------- SNMP options ----------
#define LWIP_SNMP 0
#define SNMP_LWIP_MIB2 0
#define MIB2_STATS 0
#define SNMP_USE_RAW 0
#define SNMP_USE_NETCONN 1
//#define SNMP_CONCURRENT_REQUESTS 1
//#define SNMP_TRAP_DESTINATIONS 1
//#define SNMP_PRIVATE_MIB 1
//#define SNMP_SAFE_REQUESTS 1
/* ---------- UDP options ---------- */
#define LWIP_UDP 1
#define UDP_TTL 255
#define LWIP_SO_RCVTIMEO 1 // Эта опция необходима для netconn_set_recvtimeout в модуле udp_netsetting.c
#define LWIP_SO_SNDTIMEO 1 //
/* ---------- Statistics options ---------- */
#define LWIP_STATS 1
#define LWIP_STATS_DISPLAY 1
#define LWIP_PROVIDE_ERRNO 1
#define LWIP_NETIF_LINK_CALLBACK 0
/*
--------------------------------------
---------- Checksum options ----------
--------------------------------------
*/
/*
The STM32F4x7 allows computing and verifying the IP, UDP, TCP and ICMP checksums by hardware:
- To use this feature let the following define uncommented.
- To disable it and process by CPU comment the the checksum.
*/
//#define CHECKSUM_BY_HARDWARE
#ifdef CHECKSUM_BY_HARDWARE
/* CHECKSUM_GEN_IP==0: Generate checksums by hardware for outgoing IP packets.*/
#define CHECKSUM_GEN_IP 0
/* CHECKSUM_GEN_UDP==0: Generate checksums by hardware for outgoing UDP packets.*/
#define CHECKSUM_GEN_UDP 0
/* CHECKSUM_GEN_TCP==0: Generate checksums by hardware for outgoing TCP packets.*/
#define CHECKSUM_GEN_TCP 0
/* CHECKSUM_CHECK_IP==0: Check checksums by hardware for incoming IP packets.*/
#define CHECKSUM_CHECK_IP 0
/* CHECKSUM_CHECK_UDP==0: Check checksums by hardware for incoming UDP packets.*/
#define CHECKSUM_CHECK_UDP 0
/* CHECKSUM_CHECK_TCP==0: Check checksums by hardware for incoming TCP packets.*/
#define CHECKSUM_CHECK_TCP 0
/* CHECKSUM_CHECK_ICMP==0: Check checksums by hardware for incoming ICMP packets.*/
#define CHECKSUM_GEN_ICMP 0
#else
/* CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.*/
#define CHECKSUM_GEN_IP 1
/* CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.*/
#define CHECKSUM_GEN_UDP 1
/* CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.*/
#define CHECKSUM_GEN_TCP 1
/* CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.*/
#define CHECKSUM_CHECK_IP 1
/* CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.*/
#define CHECKSUM_CHECK_UDP 1
/* CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.*/
#define CHECKSUM_CHECK_TCP 1
/* CHECKSUM_CHECK_ICMP==1: Check checksums by hardware for incoming ICMP packets.*/
#define CHECKSUM_GEN_ICMP 1
#endif
/*
----------------------------------------------
---------- Sequential layer options ----------
----------------------------------------------
*/
#define LWIP_RAW 1
/**
* LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
*/
#define LWIP_NETCONN 1
/*
------------------------------------
---------- Socket options ----------
------------------------------------
*/
/**
* LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
*/
#define LWIP_SOCKET 1
#define LWIP_DNS 1
#define SO_REUSE 1
/*
------------------------------------
----------- SNTP options -----------
------------------------------------
*/
#define SNTP_MAX_SERVERS 2
#define SNTP_SERVER_DNS 1
#define SNTP_UPDATE_DELAY 86400000 // 24 часа
#define SNTP_SET_SYSTEM_TIME(t) lwip_time_sinhro(t)
#define SNTP_STARTUP_DELAY 1
#define SNTP_STARTUP_DELAY_FUNC 10000
/*
------------------------------------
------------ PPP options -----------
------------------------------------
*/
#define PPP_SUPPORT 0
#define PPPOS_SUPPORT 0
#define PPP_INPROC_IRQ_SAFE 0
#define PRINTPKT_SUPPORT 0
#define PPP_IPV4_SUPPORT 0
#define PAP_SUPPORT 1
#define CHAP_SUPPORT 0
#define MSCHAP_SUPPORT 0
#define EAP_SUPPORT 0
#define CCP_SUPPORT 0
#define MPPE_SUPPORT 0
/*
------------------------------------
------------ MQTT options ----------
------------------------------------
*/
#define MQTT_OUTPUT_RINGBUF_SIZE 512
#define MQTT_VAR_HEADER_BUFFER_LEN 512
/*
-----------------------------------
----------- HOOK options ----------
-----------------------------------
*/
//#define LWIP_HOOK_FILENAME "lwip_route_hook.h"
//#include LWIP_HOOK_FILENAME
//#define LWIP_TCPIP_THREAD_ALIVE() lwip_alive()
/*
-----------------------------------
---------- DEBUG options ----------
-----------------------------------
*/
#define LWIP_DEBUG
#define TCP_DEBUG LWIP_DBG_OFF
#define TCP_RTO_DEBUG LWIP_DBG_OFF
#define TCP_CWND_DEBUG LWIP_DBG_OFF
#define ETHARP_DEBUG LWIP_DBG_OFF
#define PBUF_DEBUG LWIP_DBG_OFF
#define IP_DEBUG LWIP_DBG_OFF
#define TCPIP_DEBUG LWIP_DBG_OFF
#define DHCP_DEBUG LWIP_DBG_OFF
#define UDP_DEBUG LWIP_DBG_OFF
#define SOCKETS_DEBUG LWIP_DBG_OFF
#define MEMP_DEBUG LWIP_DBG_OFF
#define PING_DEBUG LWIP_DBG_OFF
#define SNMP_DEBUG LWIP_DBG_OFF
#define SNMP_MIB_DEBUG LWIP_DBG_OFF
#define TIMERS_DEBUG LWIP_DBG_OFF
#define ICMP_DEBUG LWIP_DBG_OFF
#define NETIF_DEBUG LWIP_DBG_OFF
#define PPP_DEBUG LWIP_DBG_OFF
#define SNTP_DEBUG LWIP_DBG_OFF
#define MQTT_DEBUG LWIP_DBG_OFF
/*
---------------------------------
---------- OS options ----------
---------------------------------
*/
#define TCPIP_THREAD_STACKSIZE 800
#define TCPIP_MBOX_SIZE 150//50
#define DEFAULT_UDP_RECVMBOX_SIZE 20
#define DEFAULT_TCP_RECVMBOX_SIZE 70
#define DEFAULT_RAW_RECVMBOX_SIZE 10
#define DEFAULT_ACCEPTMBOX_SIZE 20
#define DEFAULT_THREAD_STACKSIZE 500
#define TCPIP_THREAD_PRIO (configMAX_PRIORITIES - 2)
#define MEMP_NUM_TCPIP_MSG_INPKT 40//20
#define LWIP_DISABLE_TCP_SANITY_CHECKS 1
#endif /* __LWIPOPTS_H__ */
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/