bt-67xx_universal_hw/thirdparty/lwip/port/FreeRTOS/ethernetif.c

/**
 * @file
 * Ethernet Interface Skeleton
 *
 */

/*
 * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
 * OF SUCH DAMAGE.
 *
 * This file is part of the lwIP TCP/IP stack.
 *
 * Author: Adam Dunkels <adam@sics.se>
 *
 */

/*
 * This file is a skeleton for developing Ethernet network interface
 * drivers for lwIP. Add code to the low_level functions and do a
 * search-and-replace for the word "ethernetif" to replace it with
 * something that better describes your network interface.
 */

#include "lwip/opt.h"
#include "lwip/def.h"
#include "lwip/mem.h"
#include "lwip/pbuf.h"
#include "lwip/sys.h"
#include "netif/etharp.h"
#include "err.h"
#include "ethernetif.h"
#include "lwip/timeouts.h"

#include "common_config.h"
#include "settings_api.h"
#include "stm32f4x7_eth.h"
#include <string.h>


#define netifMTU                                (1500)
#define netifINTERFACE_TASK_STACK_SIZE		( 150 )
#define netifINTERFACE_TASK_PRIORITY		( configMAX_PRIORITIES - 1 )
#define netifGUARD_BLOCK_TIME			( 250 )
/* The time to block waiting for input. */
#define emacBLOCK_TIME_WAITING_FOR_INPUT	( ( TickType_t ) 100 )

/* Define those to better describe your network interface. */
#define IFNAME0 's'
#define IFNAME1 't'


static struct netif *s_pxNetIf = NULL;
SemaphoreHandle_t s_xSemaphore = NULL;
          

/* Ethernet Rx & Tx DMA Descriptors */
extern ETH_DMADESCTypeDef  DMARxDscrTab[ETH_RXBUFNB], DMATxDscrTab[ETH_TXBUFNB];

/* Ethernet Receive buffers  */
extern uint8_t Rx_Buff[ETH_RXBUFNB][ETH_RX_BUF_SIZE]; 

/* Ethernet Transmit buffers */
extern uint8_t Tx_Buff[ETH_TXBUFNB][ETH_TX_BUF_SIZE]; 

/* Global pointers to track current transmit and receive descriptors */
extern ETH_DMADESCTypeDef  *DMATxDescToSet;
extern ETH_DMADESCTypeDef  *DMARxDescToGet;

/* Global pointer for last received frame infos */
extern ETH_DMA_Rx_Frame_infos *DMA_RX_FRAME_infos;

extern uint8_t MAC[6];


static void ethernetif_input( void * pvParameters );
static void arp_timer(void *arg);


/**
 * In this function, the hardware should be initialized.
 * Called from ethernetif_init().
 *
 * @param netif the already initialized lwip network interface structure
 *        for this ethernetif
 */
static void low_level_init(struct netif *netif)
{
  uint8_t mac[6];
  uint32_t i;
 
  /* set netif MAC hardware address length */
  netif->hwaddr_len = ETHARP_HWADDR_LEN;

  SETTINGS_GetMac(mac);

  netif->hwaddr[0] =  mac[0];
  netif->hwaddr[1] =  mac[1];
  netif->hwaddr[2] =  mac[2];
  netif->hwaddr[3] =  mac[3];
  netif->hwaddr[4] =  mac[4];
  netif->hwaddr[5] =  mac[5];

  /* set netif maximum transfer unit */
  netif->mtu = 1500;

  /* Accept broadcast address and ARP traffic */
  netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP;
  
  s_pxNetIf =netif;
 
  /* create binary semaphore used for informing ethernetif of frame reception */
  if (s_xSemaphore == NULL)
  {
    s_xSemaphore= xSemaphoreCreateCounting(20,0);
  }

  /* initialize MAC address in ethernet MAC */ 
  ETH_MACAddressConfig(ETH_MAC_Address0, netif->hwaddr); 
  
  /* Initialize Tx Descriptors list: Chain Mode */
  ETH_DMATxDescChainInit(DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
  /* Initialize Rx Descriptors list: Chain Mode  */
  ETH_DMARxDescChainInit(DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
  
  /* Enable Ethernet Rx interrrupt */
  { 
    for(i=0; i<ETH_RXBUFNB; i++)
    {
      ETH_DMARxDescReceiveITConfig(&DMARxDscrTab[i], ENABLE);
    }
  }

#ifdef CHECKSUM_BY_HARDWARE
  /* Enable the checksum insertion for the Tx frames */
  {
    for(i=0; i<ETH_TXBUFNB; i++)
    {
      ETH_DMATxDescChecksumInsertionConfig(&DMATxDscrTab[i], ETH_DMATxDesc_ChecksumTCPUDPICMPFull);
    }
  } 
#endif
  
  /* create the task that handles the ETH_MAC */
  xTaskCreate(ethernetif_input, "Eth_if", netifINTERFACE_TASK_STACK_SIZE, NULL,
              netifINTERFACE_TASK_PRIORITY,NULL);
  
  /* Enable MAC and DMA transmission and reception */
  ETH_Start();   
}


/**
 * This function should do the actual transmission of the packet. The packet is
 * contained in the pbuf that is passed to the function. This pbuf
 * might be chained.
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @param p the MAC packet to send (e.g. IP packet including MAC addresses and type)
 * @return ERR_OK if the packet could be sent
 *         an err_t value if the packet couldn't be sent
 *
 * @note Returning ERR_MEM here if a DMA queue of your MAC is full can lead to
 *       strange results. You might consider waiting for space in the DMA queue
 *       to become availale since the stack doesn't retry to send a packet
 *       dropped because of memory failure (except for the TCP timers).
 */

static err_t low_level_output(struct netif *netif, struct pbuf *p)
{
  static SemaphoreHandle_t xTxSemaphore = NULL;
  struct pbuf *q;
  uint32_t l = 0;
  u8 *buffer ;
  
  if (xTxSemaphore == NULL)
  {
    vSemaphoreCreateBinary (xTxSemaphore);
  } 
   
  if (xSemaphoreTake(xTxSemaphore, netifGUARD_BLOCK_TIME))
  {
    buffer =  (u8 *)(DMATxDescToSet->Buffer1Addr);
    for(q = p; q != NULL; q = q->next) 
    {
      memcpy((u8_t*)&buffer[l], q->payload, q->len);
      l = l + q->len;
    }
    ETH_Prepare_Transmit_Descriptors(l);
    xSemaphoreGive(xTxSemaphore);
  }

  return ERR_OK;
}


	
  	

/**
 * Should allocate a pbuf and transfer the bytes of the incoming
 * packet from the interface into the pbuf.
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @return a pbuf filled with the received packet (including MAC header)
 *         NULL on memory error
 */
static struct pbuf * low_level_input(struct netif *netif)
{
  struct pbuf *p, *q;
  u16_t len;
  uint32_t l=0,i =0;
  FrameTypeDef frame;
  u8 *buffer;
  __IO ETH_DMADESCTypeDef *DMARxNextDesc;
  
  p = NULL;
  
  /* Get received frame */
  frame = ETH_Get_Received_Frame_interrupt();
  
  /* check that frame has no error */
  if ((frame.descriptor->Status & ETH_DMARxDesc_ES) == (uint32_t)RESET)
  {
    
    /* Obtain the size of the packet and put it into the "len" variable. */
    len = frame.length;
    buffer = (u8 *)frame.buffer;

    /* We allocate a pbuf chain of pbufs from the pool. */
    p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL);
 
    /* Copy received frame from ethernet driver buffer to stack buffer */
    if (p != NULL)
    { 
      for (q = p; q != NULL; q = q->next)
      {
        memcpy((u8_t*)q->payload, (u8_t*)&buffer[l], q->len);
        l = l + q->len;
      } 
    }
  }
  
  /* Release descriptors to DMA */
  /* Check if received frame with multiple DMA buffer segments */
  if (DMA_RX_FRAME_infos->Seg_Count > 1)
  {
    DMARxNextDesc = DMA_RX_FRAME_infos->FS_Rx_Desc;
  }
  else
  {
    DMARxNextDesc = frame.descriptor;
  }
  
  /* Set Own bit in Rx descriptors: gives the buffers back to DMA */
  for (i=0; i<DMA_RX_FRAME_infos->Seg_Count; i++)
  {  
    DMARxNextDesc->Status = ETH_DMARxDesc_OWN;
    DMARxNextDesc = (ETH_DMADESCTypeDef *)(DMARxNextDesc->Buffer2NextDescAddr);
  }
  
  /* Clear Segment_Count */
  DMA_RX_FRAME_infos->Seg_Count =0;
  
  
  /* When Rx Buffer unavailable flag is set: clear it and resume reception */
  if ((ETH->DMASR & ETH_DMASR_RBUS) != (u32)RESET)  
  {
    /* Clear RBUS ETHERNET DMA flag */
    ETH->DMASR = ETH_DMASR_RBUS;
      
    /* Resume DMA reception */
    ETH->DMARPDR = 0;
  }
  return p;
}


/**
 * This function is the ethernetif_input task, it is processed when a packet 
 * is ready to be read from the interface. It uses the function low_level_input() 
 * that should handle the actual reception of bytes from the network
 * interface. Then the type of the received packet is determined and
 * the appropriate input function is called.
 *
 * @param netif the lwip network interface structure for this ethernetif
 */
/*
void ethernetif_input( void * pvParameters )
{
  struct pbuf *p;
  
  for( ;; )
  {
    if (xSemaphoreTake( s_xSemaphore, emacBLOCK_TIME_WAITING_FOR_INPUT)==pdTRUE)
    {
      p = low_level_input( s_pxNetIf );
      if (ERR_OK != s_pxNetIf->input( p, s_pxNetIf))
      {
        pbuf_free(p);
        p=NULL;
      }
    }
  }
} 
*/

void ethernetif_input(void * pvParameters)
{
  struct pbuf *p;

  for( ;; )
  {
    if(xSemaphoreTake(s_xSemaphore, emacBLOCK_TIME_WAITING_FOR_INPUT)==pdTRUE)
    {
GET_NEXT_FRAGMENT:
      p = low_level_input( s_pxNetIf );
      if (p != NULL)
      {
        if (ERR_OK != s_pxNetIf->input( p, s_pxNetIf))
        {
          pbuf_free(p);
          p=NULL;
        }
        else
        {
          xSemaphoreTake(s_xSemaphore, 0);
          goto GET_NEXT_FRAGMENT;
        }
      }
    }
  }
}
      
/**
 * Should be called at the beginning of the program to set up the
 * network interface. It calls the function low_level_init() to do the
 * actual setup of the hardware.
 *
 * This function should be passed as a parameter to netif_add().
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @return ERR_OK if the loopif is initialized
 *         ERR_MEM if private data couldn't be allocated
 *         any other err_t on error
 */
err_t ethernetif_init(struct netif *netif)
{
  LWIP_ASSERT("netif != NULL", (netif != NULL));

#if LWIP_NETIF_HOSTNAME
  /* Initialize interface hostname */
  netif->hostname = "lwip";
#endif /* LWIP_NETIF_HOSTNAME */

  netif->name[0] = IFNAME0;
  netif->name[1] = IFNAME1;

  netif->output = etharp_output;
  netif->linkoutput = low_level_output;

  /* initialize the hardware */
  low_level_init(netif);
  
  etharp_init();
  sys_timeout(ARP_TMR_INTERVAL, arp_timer, NULL);

  return ERR_OK;
}


static void arp_timer(void *arg)
{
  etharp_tmr();
  sys_timeout(ARP_TMR_INTERVAL, arp_timer, NULL);
}