[BT-6710]

docs/bt6710/BT6710.MIB

@@ -0,0 +1,302 @@
+RoTeK-swt-BT-BT-6710-signals-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	enterprises, NOTIFICATION-TYPE
+		FROM SNMPV2-SMI;
+
+    rotek           OBJECT IDENTIFIER ::= { enterprises 41752 }
+    swt             OBJECT IDENTIFIER ::= { rotek 911 }
+    BT-6710         OBJECT IDENTIFIER ::= { swt 9}
+    signals         OBJECT IDENTIFIER ::= { BT-6710 1 }
+    traps           OBJECT IDENTIFIER ::= { BT-6710 2 }
+
+	
+    fwVersion OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "FWVersion" 
+    ::= { signals 1 }
+
+    restoreSignal OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  write-only
+    STATUS  current
+    DESCRIPTION
+    "Restore settings
+    1 - restore settings"
+    ::= { signals 2 }
+	
+    rebootSignal OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  write-only
+    STATUS  current
+    DESCRIPTION
+    "Reboot device: 
+    1 - reboot"
+    ::= { signals 3 }
+    
+    upsModel OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "UPS model" 
+    ::= { signals 4 }
+    
+    di1 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "State of dry input 1
+    0 - close dry input 1
+    1 - open dry input 1" 
+    ::= { signals 5 }
+    
+    di2 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "State of dry input 2 
+    0 - close dry input 2
+    1 - open dry input 2" 
+    ::= { signals 6 }
+    
+    batTest OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  write-only
+    STATUS  current
+    DESCRIPTION
+    "0 - cancel test
+    1-99 - run test to x minutes
+    100 - run test to 10 seconds
+    999 - test till charging"
+    ::= { signals 7 }
+    
+    shutdown OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  write-only
+    STATUS  current
+    DESCRIPTION
+    "Control of shut down UPS load:
+	0 - stop shut down load
+	n - shut down load in n minutes
+	n: 0.2, 0.3, .., 1, 2, .., 10"
+    ::= { signals 8 }
+	
+    caseTemp OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Temperature case" 
+    ::= { signals 9 }
+	
+    intTemp OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Internal temperature" 
+    ::= { signals 10 }
+	
+    inFreq OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Input frequency, Hz" 
+    ::= { signals 11 }
+	
+    inVoltVAC OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Input voltage" 
+    ::= { signals 12 }
+	
+    outVoltVAC OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Output voltage" 
+    ::= { signals 13 }
+	
+    power OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Power, %" 
+    ::= { signals 14 }
+	
+    batCap OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Battery capacity, %" 
+    ::= { signals 15 }
+    
+    batTime OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Rest working time of battery, min" 
+    ::= { signals 16 }
+		
+    connectMonitor OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Connect status:
+	0 - normal;
+	1 - connect fail" 
+    ::= { signals 17 }
+    
+    alarms OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "bit 7 - utility fail
+	bit 6 - battery low
+	bit 5 - bypass/boost or buck active
+	bit 4 - UPS fail
+	bit 3 - UPS Type is Standby (0 is On_line)
+	bit 2 - Test in Progress
+	bit 1 - Shutdown Active
+	bit 0 - Beeper On" 
+    ::= { signals 18 }
+
+-- DEVICE TRAPS
+
+     fwVersionUpdate  NOTIFICATION-TYPE
+     OBJECTS              { fwVersion }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 1 }
+
+    fwVersionUpdated  NOTIFICATION-TYPE
+     OBJECTS              { fwVersion }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 2 }
+
+     deviceRestored  NOTIFICATION-TYPE
+     OBJECTS              { restoreSignal }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 3 }
+
+    deviceRebooted  NOTIFICATION-TYPE
+     OBJECTS              { rebootSignal }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 4 }
+
+     di1Norm  NOTIFICATION-TYPE
+     OBJECTS              { di1 }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 5 }
+
+    di1Alarm  NOTIFICATION-TYPE
+     OBJECTS              { di1 }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 6 }
+     
+     di2Norm  NOTIFICATION-TYPE
+     OBJECTS              { di2 }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 7 }
+
+     di2Alarm  NOTIFICATION-TYPE
+     OBJECTS              { di2 }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 8 }
+
+     batteryTemperatureHighNorm  NOTIFICATION-TYPE
+     OBJECTS              { intTemp }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 9 }
+
+    batteryTemperatureHighAlarm  NOTIFICATION-TYPE
+     OBJECTS              { intTemp }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 10 }
+	 
+     lineAlarm  NOTIFICATION-TYPE
+     OBJECTS              { inVoltVAC }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 11 }
+
+    lineNorm  NOTIFICATION-TYPE
+     OBJECTS              { inVoltVAC }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 12 } 
+
+     lowBatAlarm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 13 }
+
+     lowBatNorm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 14 }
+	 
+     doorTempAlarm  NOTIFICATION-TYPE
+     OBJECTS              { caseTemp }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 15 }
+
+    doorTempNorm  NOTIFICATION-TYPE
+     OBJECTS              { caseTemp }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 16 }
+
+	ConnectMonitorAlarm  NOTIFICATION-TYPE
+     OBJECTS              { connectMonitor }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 17 }
+	 
+     connectMonitorNorm  NOTIFICATION-TYPE
+     OBJECTS              { connectMonitor }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 18 }
+     
+     batteryConnectAlarm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 19 }
+
+    batteryConnectNorm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 20 }	
+	
+END
+