remove file

.vscode/settings.json

@@ -47,6 +47,7 @@
         "cstring": "c",
         "settings_api.h": "c",
         "board_bt6709.h": "c",
-        "lwip_hook_ip4_input.h": "c"
+        "lwip_hook_ip4_input.h": "c",
+        "atomic": "c"
     }
 }

docs/bt_6711_v1/BT6711_v1.MIB

@@ -1,710 +0,0 @@
-RoTeK-swt-BT-BT-6711-signals-MIB DEFINITIONS ::= BEGIN
-
-IMPORTS
-	enterprises, NOTIFICATION-TYPE
-		FROM SNMPV2-SMI;
-
-    rotek           OBJECT IDENTIFIER ::= { enterprises 41752 }
-    swt             OBJECT IDENTIFIER ::= { rotek 911 }
-    BT-6711_v1         OBJECT IDENTIFIER ::= { swt 13}
-    signals         OBJECT IDENTIFIER ::= { BT-6711_v1 1 }
-    traps           OBJECT IDENTIFIER ::= { BT-6711_v1 2 }
-
-	
-    fwVersion OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "FWVersion" 
-    ::= { signals 1 }
-
-    restoreSignal OBJECT-TYPE
-    SYNTAX  INTEGER
-    MAX-ACCESS  write-only
-    STATUS  current
-    DESCRIPTION
-    "Restore settings
-    1 - restore settings"
-    ::= { signals 2 }
-	
-    rebootSignal OBJECT-TYPE
-    SYNTAX  INTEGER
-    MAX-ACCESS  write-only
-    STATUS  current
-    DESCRIPTION
-    "Reboot device: 
-    1 - reboot"
-    ::= { signals 3 }
-    
-    upsModel OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "UPS model" 
-    ::= { signals 4 }
-    
-   	upsSerial OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "UPS serial" 
-    ::= { signals 5 }
-    
-    upsVersion OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "UPS version" 
-    ::= { signals 6 }
-    
-    batTest OBJECT-TYPE
-    SYNTAX  INTEGER
-    MAX-ACCESS  write-only
-    STATUS  current
-    DESCRIPTION
-    "0 - cancel test
-    1-99 - run test to x minutes
-    100 - run test to 10 seconds
-    999 - test till charging"
-    ::= { signals 7 }
-    
-    shutdown OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  write-only
-    STATUS  current
-    DESCRIPTION
-    "Control of shut down UPS load:
-	0 - stop shut down load
-	n - shut down load in n minutes
-	n: 0.2, 0.3, .., 1, 2, .., 10"
-    ::= { signals 8 }
-	
-    intTemp OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Internal temperature" 
-    ::= { signals 9 }
-	
-    inFreq OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Input frequency, Hz" 
-    ::= { signals 10 }
-	
-    inVoltVAC OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Input voltage" 
-    ::= { signals 11 }
-	
-    outVoltVAC OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Output voltage" 
-    ::= { signals 12 }
-	
-    power OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Power, %" 
-    ::= { signals 13 }
-	
-    batCap OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Battery capacity, %" 
-    ::= { signals 14 }
-    
-    batTime OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Rest working time of battery, min" 
-    ::= { signals 15 }
-		
-    connectMonitor OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Connect status:
-	0 - normal;
-	1 - connect fail" 
-    ::= { signals 16 }
-    
-    alarms OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "bit 7 - utility fail
-	bit 6 - battery low
-	bit 5 - bypass/boost or buck active
-	bit 4 - UPS fail
-	bit 3 - UPS Type is Standby (0 is On_line)
-	bit 2 - Test in Progress
-	bit 1 - Shutdown Active
-	bit 0 - Beeper On" 
-    ::= { signals 17 }
-
-    currInput OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "UPS input current, A" 
-    ::= { signals 18 }
-
-    currOutput OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "UPS output current, A" 
-    ::= { signals 19 }
-
-    upsMode OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "UPS mode" 
-    ::= { signals 20 }
-
-    voltAKB OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "AKB current voltage, V" 
-    ::= { signals 21 }
-    
-    server1 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Get/set server1 for traps" 
-    ::= { signals 22 }
-    
-    server2 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Get/set server2 for traps" 
-    ::= { signals 23 }
-    
-    server3 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Get/set server3 for traps" 
-    ::= { signals 24 }
-    
-    server4 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Get/set server4 for traps" 
-    ::= { signals 25 }
-    
-    server5 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Get/set server5 for traps" 
-    ::= { signals 26 }
-    
-    whiteListRange1 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "white List Range1" 
-    ::= { signals 27 }
-    
-    whiteListRange2 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "white List Range2" 
-    ::= { signals 28 }
-    
-    whiteListRange3 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "white List Range3" 
-    ::= { signals 29 }
-    
-    whiteListRange4 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "white List Range4" 
-    ::= { signals 30 }
-    
-    whiteListRange5 OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "white List Range5" 
-    ::= { signals 31 }
-    
-    upsVoltCellMin OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "UPS voltage cell min" 
-    ::= { signals 32 }
-    
-    upsVoltCellMax OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "UPS voltage cell max" 
-    ::= { signals 33 }
-
-    voltAKBNominal OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "AKB nominal capacity, V" 
-    ::= { signals 34 } 
-
-    capAKBNominal OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "AKB norminal capacity, Ah" 
-    ::= { signals 35 } 
-
-    upsFullPower OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "UPS full power, VA" 
-    ::= { signals 36 } 
-    
-    vacAlarmHighRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "VAC alarm high range" 
-    ::= { signals 37 }
-    
-    vacAlarmLowRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "VAC alarm low range" 
-    ::= { signals 38 }
-    
-    vacAlarmHistRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "VAC alarm hist range" 
-    ::= { signals 39 }
-
-    vacInAlarmHighRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "VACin alarm high range" 
-    ::= { signals 40 }
-    
-    vacInAlarmLowRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "VACin alarm low range" 
-    ::= { signals 41 }
-    
-    vacInAlarmHistRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "VACin alarm hist range" 
-    ::= { signals 42 }
-    
-    tempAlarmHighRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Temperature alarm high range" 
-    ::= { signals 43 }
-    
-    tempAlarmLowRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Temprature alarm low range" 
-    ::= { signals 44 }
-    
-    tempAlarmHistRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Temprature alarm hist range" 
-    ::= { signals 45 }
-    
-    loadAlarmHighRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Load alarm high range" 
-    ::= { signals 46 }
-    
-    loadAlarmHistRange OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Load alarm hist range" 
-    ::= { signals 47 }
-
-    sntpTimeZone OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Sntp time zone" 
-    ::= { signals 48 }
-
-    sntpState OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "SNTP synchronization state
-    0 - disable
-    1 - enable" 
-    ::= { signals 49 }
-    
-    sntpServerIp OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Sntp server IP  address" 
-    ::= { signals 50 }
-    
-    sntpLastData OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "SNTP last synchronization timestamp" 
-    ::= { signals 51 }
-    
-    dateController OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Current date, YYYY-MM-DD" 
-    ::= { signals 52 }
-    
-    timeController OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Current time, hh:mm" 
-    ::= { signals 53 }
-    
-    akbWorkTime OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Work time from AKB, minutes" 
-    ::= { signals 54 }
-
-    syslogENA OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Syslog enable,
-    0 - disable;
-    1 - enable" 
-    ::= { signals 55 }
-
-    syslogServerIP OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Syslog server IP" 
-    ::= { signals 56 }
-
-    syslogServerPort OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "Syslog server port" 
-    ::= { signals 57 }
-
-    radiusENA OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "RADIUS enable,
-    0 - disable;
-    1 - enable" 
-    ::= { signals 58 }
-
-    radiusServerIP OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "RADIUS server IP" 
-    ::= { signals 59 }
-
-    radiusServerPort OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "RADIUS server port" 
-    ::= { signals 60 }
-
-    radiusPWD OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-write
-    STATUS  current
-    DESCRIPTION
-    "RADIUS secret word" 
-    ::= { signals 61 }
-
-   	controllerSerial OBJECT-TYPE
-    SYNTAX  OCTET STRING
-    MAX-ACCESS  read-only
-    STATUS  current
-    DESCRIPTION
-    "Controller serial" 
-    ::= { signals 62 }
-
--- DEVICE TRAPS
-
-     fwVersionUpdate  NOTIFICATION-TYPE
-     OBJECTS              { fwVersion }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 1 }
-
-    fwVersionUpdated  NOTIFICATION-TYPE
-     OBJECTS              { fwVersion }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 2 }
-
-     deviceRestored  NOTIFICATION-TYPE
-     OBJECTS              { restoreSignal }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 3 }
-
-    deviceRebooted  NOTIFICATION-TYPE
-     OBJECTS              { rebootSignal }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 4 }
-
-     upsModeChanged  NOTIFICATION-TYPE
-     OBJECTS              { upsMode }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 5 }
-
-     batteryTemperatureHighNorm  NOTIFICATION-TYPE
-     OBJECTS              { intTemp }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 6 }
-
-    batteryTemperatureHighAlarm  NOTIFICATION-TYPE
-     OBJECTS              { intTemp }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 7 }
-
-     batteryTemperatureLowNorm  NOTIFICATION-TYPE
-     OBJECTS              { intTemp }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 8 }
-
-     batteryTemperatureLowAlarm  NOTIFICATION-TYPE
-     OBJECTS              { intTemp }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 9 }
-	 
-     lineAlarm  NOTIFICATION-TYPE
-     OBJECTS              { inVoltVAC }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 10 }
-
-    lineNorm  NOTIFICATION-TYPE
-     OBJECTS              { inVoltVAC }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 11 } 
-
-     vacOutputLowAlarm  NOTIFICATION-TYPE
-     OBJECTS              { outVoltVAC }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 12 }
-
-     vacOutputLowNorm  NOTIFICATION-TYPE
-     OBJECTS              { outVoltVAC }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 13 } 
-
-     vacOutputHighAlarm  NOTIFICATION-TYPE
-     OBJECTS              { outVoltVAC }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 14 }
-
-     vacOutputHighNorm  NOTIFICATION-TYPE
-     OBJECTS              { outVoltVAC }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 15 } 
-
-     testBatRun  NOTIFICATION-TYPE
-     OBJECTS              { batCap }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 16 }
-
-     testBatStop  NOTIFICATION-TYPE
-     OBJECTS              { batCap }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 17 }
-
-     batteryFailed  NOTIFICATION-TYPE
-     OBJECTS              { batCap }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 18 }
-
-     batteryNorm  NOTIFICATION-TYPE
-     OBJECTS              { batCap }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 19 }	
-
-     lowBatAlarm  NOTIFICATION-TYPE
-     OBJECTS              { batCap }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 20 }
-
-     lowBatNorm  NOTIFICATION-TYPE
-     OBJECTS              { batCap }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 21 }
-
-     batteryConnectAlarm  NOTIFICATION-TYPE
-     OBJECTS              { batCap }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 22 }
-
-     batteryConnectNorm  NOTIFICATION-TYPE
-     OBJECTS              { batCap }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 23 }	
-	 
-     powerAlarm  NOTIFICATION-TYPE
-     OBJECTS              { power }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 24 }
-
-    powerNorm  NOTIFICATION-TYPE
-     OBJECTS              { power }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 25 }
-
-	ConnectMonitorAlarm  NOTIFICATION-TYPE
-     OBJECTS              { connectMonitor }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 26 }
-	 
-     connectMonitorNorm  NOTIFICATION-TYPE
-     OBJECTS              { connectMonitor }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 27 }
-
-	phaseAlarm  NOTIFICATION-TYPE
-     OBJECTS              { connectMonitor }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 28 }
-	 
-     phaseNorm  NOTIFICATION-TYPE
-     OBJECTS              { connectMonitor }
-     STATUS               current
-     DESCRIPTION ""
-     ::= { traps 29 }
-
-END
-