fix docs and env file for jenkins releases

docs/bt6703_rt/DEPRECATED_FOLDER.md

@@ -0,0 +1 @@
+Проверить что ничего не сломалось, если удалить папку

docs/bt6711-v1/BT6711_v1.MIB

@@ -0,0 +1,710 @@
+RoTeK-swt-BT-BT-6711_v1-signals-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	enterprises, NOTIFICATION-TYPE
+		FROM SNMPV2-SMI;
+
+    rotek           OBJECT IDENTIFIER ::= { enterprises 41752 }
+    swt             OBJECT IDENTIFIER ::= { rotek 911 }
+    BT-6711_v1      OBJECT IDENTIFIER ::= { swt 13}
+    signals         OBJECT IDENTIFIER ::= { BT-6711_v1 1 }
+    traps           OBJECT IDENTIFIER ::= { BT-6711_v1 2 }
+
+	
+    fwVersion OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "FWVersion" 
+    ::= { signals 1 }
+
+    restoreSignal OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  write-only
+    STATUS  current
+    DESCRIPTION
+    "Restore settings
+    1 - restore settings"
+    ::= { signals 2 }
+	
+    rebootSignal OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  write-only
+    STATUS  current
+    DESCRIPTION
+    "Reboot device: 
+    1 - reboot"
+    ::= { signals 3 }
+    
+    upsModel OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "UPS model" 
+    ::= { signals 4 }
+    
+   	upsSerial OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "UPS serial" 
+    ::= { signals 5 }
+    
+    upsVersion OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "UPS version" 
+    ::= { signals 6 }
+    
+    batTest OBJECT-TYPE
+    SYNTAX  INTEGER
+    MAX-ACCESS  write-only
+    STATUS  current
+    DESCRIPTION
+    "0 - cancel test
+    1-99 - run test to x minutes
+    100 - run test to 10 seconds
+    999 - test till charging"
+    ::= { signals 7 }
+    
+    shutdown OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  write-only
+    STATUS  current
+    DESCRIPTION
+    "Control of shut down UPS load:
+	0 - stop shut down load
+	n - shut down load in n minutes
+	n: 0.2, 0.3, .., 1, 2, .., 10"
+    ::= { signals 8 }
+	
+    intTemp OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Internal temperature" 
+    ::= { signals 9 }
+	
+    inFreq OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Input frequency, Hz" 
+    ::= { signals 10 }
+	
+    inVoltVAC OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Input voltage" 
+    ::= { signals 11 }
+	
+    outVoltVAC OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Output voltage" 
+    ::= { signals 12 }
+	
+    power OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Power, %" 
+    ::= { signals 13 }
+	
+    batCap OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Battery capacity, %" 
+    ::= { signals 14 }
+    
+    batTime OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Rest working time of battery, min" 
+    ::= { signals 15 }
+		
+    connectMonitor OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Connect status:
+	0 - normal;
+	1 - connect fail" 
+    ::= { signals 16 }
+    
+    alarms OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "bit 7 - utility fail
+	bit 6 - battery low
+	bit 5 - bypass/boost or buck active
+	bit 4 - UPS fail
+	bit 3 - UPS Type is Standby (0 is On_line)
+	bit 2 - Test in Progress
+	bit 1 - Shutdown Active
+	bit 0 - Beeper On" 
+    ::= { signals 17 }
+
+    currInput OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "UPS input current, A" 
+    ::= { signals 18 }
+
+    currOutput OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "UPS output current, A" 
+    ::= { signals 19 }
+
+    upsMode OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "UPS mode" 
+    ::= { signals 20 }
+
+    voltAKB OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "AKB current voltage, V" 
+    ::= { signals 21 }
+    
+    server1 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Get/set server1 for traps" 
+    ::= { signals 22 }
+    
+    server2 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Get/set server2 for traps" 
+    ::= { signals 23 }
+    
+    server3 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Get/set server3 for traps" 
+    ::= { signals 24 }
+    
+    server4 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Get/set server4 for traps" 
+    ::= { signals 25 }
+    
+    server5 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Get/set server5 for traps" 
+    ::= { signals 26 }
+    
+    whiteListRange1 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "white List Range1" 
+    ::= { signals 27 }
+    
+    whiteListRange2 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "white List Range2" 
+    ::= { signals 28 }
+    
+    whiteListRange3 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "white List Range3" 
+    ::= { signals 29 }
+    
+    whiteListRange4 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "white List Range4" 
+    ::= { signals 30 }
+    
+    whiteListRange5 OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "white List Range5" 
+    ::= { signals 31 }
+    
+    upsVoltCellMin OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "UPS voltage cell min" 
+    ::= { signals 32 }
+    
+    upsVoltCellMax OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "UPS voltage cell max" 
+    ::= { signals 33 }
+
+    voltAKBNominal OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "AKB nominal capacity, V" 
+    ::= { signals 34 } 
+
+    capAKBNominal OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "AKB norminal capacity, Ah" 
+    ::= { signals 35 } 
+
+    upsFullPower OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "UPS full power, VA" 
+    ::= { signals 36 } 
+    
+    vacAlarmHighRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "VAC alarm high range" 
+    ::= { signals 37 }
+    
+    vacAlarmLowRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "VAC alarm low range" 
+    ::= { signals 38 }
+    
+    vacAlarmHistRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "VAC alarm hist range" 
+    ::= { signals 39 }
+
+    vacInAlarmHighRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "VACin alarm high range" 
+    ::= { signals 40 }
+    
+    vacInAlarmLowRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "VACin alarm low range" 
+    ::= { signals 41 }
+    
+    vacInAlarmHistRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "VACin alarm hist range" 
+    ::= { signals 42 }
+    
+    tempAlarmHighRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Temperature alarm high range" 
+    ::= { signals 43 }
+    
+    tempAlarmLowRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Temprature alarm low range" 
+    ::= { signals 44 }
+    
+    tempAlarmHistRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Temprature alarm hist range" 
+    ::= { signals 45 }
+    
+    loadAlarmHighRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Load alarm high range" 
+    ::= { signals 46 }
+    
+    loadAlarmHistRange OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Load alarm hist range" 
+    ::= { signals 47 }
+
+    sntpTimeZone OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Sntp time zone" 
+    ::= { signals 48 }
+
+    sntpState OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "SNTP synchronization state
+    0 - disable
+    1 - enable" 
+    ::= { signals 49 }
+    
+    sntpServerIp OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Sntp server IP  address" 
+    ::= { signals 50 }
+    
+    sntpLastData OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "SNTP last synchronization timestamp" 
+    ::= { signals 51 }
+    
+    dateController OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Current date, YYYY-MM-DD" 
+    ::= { signals 52 }
+    
+    timeController OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Current time, hh:mm" 
+    ::= { signals 53 }
+    
+    akbWorkTime OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Work time from AKB, minutes" 
+    ::= { signals 54 }
+
+    syslogENA OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Syslog enable,
+    0 - disable;
+    1 - enable" 
+    ::= { signals 55 }
+
+    syslogServerIP OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Syslog server IP" 
+    ::= { signals 56 }
+
+    syslogServerPort OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "Syslog server port" 
+    ::= { signals 57 }
+
+    radiusENA OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "RADIUS enable,
+    0 - disable;
+    1 - enable" 
+    ::= { signals 58 }
+
+    radiusServerIP OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "RADIUS server IP" 
+    ::= { signals 59 }
+
+    radiusServerPort OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "RADIUS server port" 
+    ::= { signals 60 }
+
+    radiusPWD OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+    "RADIUS secret word" 
+    ::= { signals 61 }
+
+   	controllerSerial OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+    "Controller serial" 
+    ::= { signals 62 }
+
+-- DEVICE TRAPS
+
+     fwVersionUpdate  NOTIFICATION-TYPE
+     OBJECTS              { fwVersion }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 1 }
+
+    fwVersionUpdated  NOTIFICATION-TYPE
+     OBJECTS              { fwVersion }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 2 }
+
+     deviceRestored  NOTIFICATION-TYPE
+     OBJECTS              { restoreSignal }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 3 }
+
+    deviceRebooted  NOTIFICATION-TYPE
+     OBJECTS              { rebootSignal }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 4 }
+
+     upsModeChanged  NOTIFICATION-TYPE
+     OBJECTS              { upsMode }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 5 }
+
+     batteryTemperatureHighNorm  NOTIFICATION-TYPE
+     OBJECTS              { intTemp }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 6 }
+
+    batteryTemperatureHighAlarm  NOTIFICATION-TYPE
+     OBJECTS              { intTemp }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 7 }
+
+     batteryTemperatureLowNorm  NOTIFICATION-TYPE
+     OBJECTS              { intTemp }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 8 }
+
+     batteryTemperatureLowAlarm  NOTIFICATION-TYPE
+     OBJECTS              { intTemp }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 9 }
+	 
+     lineAlarm  NOTIFICATION-TYPE
+     OBJECTS              { inVoltVAC }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 10 }
+
+    lineNorm  NOTIFICATION-TYPE
+     OBJECTS              { inVoltVAC }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 11 } 
+
+     vacOutputLowAlarm  NOTIFICATION-TYPE
+     OBJECTS              { outVoltVAC }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 12 }
+
+     vacOutputLowNorm  NOTIFICATION-TYPE
+     OBJECTS              { outVoltVAC }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 13 } 
+
+     vacOutputHighAlarm  NOTIFICATION-TYPE
+     OBJECTS              { outVoltVAC }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 14 }
+
+     vacOutputHighNorm  NOTIFICATION-TYPE
+     OBJECTS              { outVoltVAC }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 15 } 
+
+     testBatRun  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 16 }
+
+     testBatStop  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 17 }
+
+     batteryFailed  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 18 }
+
+     batteryNorm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 19 }	
+
+     lowBatAlarm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 20 }
+
+     lowBatNorm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 21 }
+
+     batteryConnectAlarm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 22 }
+
+     batteryConnectNorm  NOTIFICATION-TYPE
+     OBJECTS              { batCap }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 23 }	
+	 
+     powerAlarm  NOTIFICATION-TYPE
+     OBJECTS              { power }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 24 }
+
+    powerNorm  NOTIFICATION-TYPE
+     OBJECTS              { power }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 25 }
+
+	ConnectMonitorAlarm  NOTIFICATION-TYPE
+     OBJECTS              { connectMonitor }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 26 }
+	 
+     connectMonitorNorm  NOTIFICATION-TYPE
+     OBJECTS              { connectMonitor }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 27 }
+
+	phaseAlarm  NOTIFICATION-TYPE
+     OBJECTS              { connectMonitor }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 28 }
+	 
+     phaseNorm  NOTIFICATION-TYPE
+     OBJECTS              { connectMonitor }
+     STATUS               current
+     DESCRIPTION ""
+     ::= { traps 29 }
+
+END
+

docs/bt6711-v1/Changelog.md

@@ -0,0 +1,7 @@
+# 1.0
+### Добавлено
+Первый релиз
+
+
+
+

docs/bt6711_v1/DEPRECATED_FOLDER.md

@@ -0,0 +1 @@
+Проверить что ничего не сломалось, если удалить папку

jenkins-env.groovy

@@ -58,6 +58,12 @@ make HARDWARE=bt6711 VERBOSE=1 DEBUG=0 PRINTF=custom MAC=EC-4C-4D-00-EE-DВ
 mkdir -p ./output_all/bt6711/
 cp ./output/* ./output_all/bt6711/
 cp ./docs/bt6711/*.MIB ./output_all/bt6711/
+
+make distclean
+make HARDWARE=bt6711_v1 VERBOSE=1 DEBUG=0 PRINTF=custom MAC=EC-4C-4D-00-EE-DC
+mkdir -p ./output_all/bt6711-v1/
+cp ./output/* ./output_all/bt6711-v1/
+cp ./docs/bt6711-v1/*.MIB ./output_all/bt6711-v1/
 """
 
 changelogFolder = "docs/"    // Папка с ченджлогом. Оставить пустым, если файл в корне репозитория. 
@@ -73,4 +79,4 @@ buildenvAgent = "stm32-buildenv-agent-v1"
 // Список устройств, для которых компилируется данный код (только тукущая ветка, не весь репозиторий). 
 // При сборке релиза проверяется, что устройство указанное в теге состоит в этом множестве.
 // Синтаксис: groovy list
-devices = ['bt6703', 'bt6703-rt', 'bt6707', 'bt6709', 'bt6709-mts', 'bt6710', 'bt6711']
+devices = ['bt6703', 'bt6703-rt', 'bt6707', 'bt6709', 'bt6709-mts', 'bt6710', 'bt6711', 'bt6711-v1']