ソースを参照

add gcc config

balbekova 8 年 前
コミット
25de8a1c72

+ 11 - 0
projects/gcc/configs/stm32f4discovery.cfg

@@ -0,0 +1,11 @@
+# This is an STM32F4 discovery board with a single STM32F407VGT6 chip.
+# http://www.st.com/internet/evalboard/product/252419.jsp
+
+source [find interface/stlink-v2.cfg]
+
+transport select hla_swd
+
+source [find target/stm32f4x_stlink.cfg]
+
+reset_config  srst_only
+tpiu config internal tracefile.bin uart	off 120000000 1600000

+ 512 - 0
projects/gcc/startup_stm32f4xx.s

@@ -0,0 +1,512 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f4xx.s
+  * @author    MCD Application Team
+  * @version   V1.0.0
+  * @date      30-September-2011
+  * @brief     STM32F4xx Devices vector table for Atollic TrueSTUDIO toolchain. 
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system and the external SRAM mounted on 
+  *                  STM324xG-EVAL board to be used as data memory (optional, 
+  *                  to be enabled by user)
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit   
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl  main
+  bx  lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+    
+    
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  
+  /* External Interrupts */
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */                                        
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */                        
+  .word     TAMP_STAMP_IRQHandler             /* Tamper and TimeStamps through the EXTI line */            
+  .word     RTC_WKUP_IRQHandler               /* RTC Wakeup through the EXTI line */                      
+  .word     FLASH_IRQHandler                  /* FLASH                        */                                          
+  .word     RCC_IRQHandler                    /* RCC                          */                                            
+  .word     EXTI_IRQHandler                  /* EXTI Line0                   */
+  .word     EXTI_IRQHandler                  /* EXTI Line1                   */
+  .word     EXTI_IRQHandler                  /* EXTI Line2                   */
+  .word     EXTI_IRQHandler                  /* EXTI Line3                   */
+  .word     EXTI_IRQHandler                  /* EXTI Line4                   */
+  .word     DMA1_Stream0_IRQHandler           /* DMA1 Stream 0                */                  
+  .word     DMA1_Stream1_IRQHandler           /* DMA1 Stream 1                */                   
+  .word     DMA1_Stream2_IRQHandler           /* DMA1 Stream 2                */                   
+  .word     DMA1_Stream3_IRQHandler           /* DMA1 Stream 3                */                   
+  .word     DMA1_Stream4_IRQHandler           /* DMA1 Stream 4                */                   
+  .word     DMA1_Stream5_IRQHandler           /* DMA1 Stream 5                */                   
+  .word     DMA1_Stream6_IRQHandler           /* DMA1 Stream 6                */                   
+  .word     ADC_IRQHandler                    /* ADC1, ADC2 and ADC3s         */                   
+  .word     CAN1_TX_IRQHandler                /* CAN1 TX                      */                         
+  .word     CAN1_RX0_IRQHandler               /* CAN1 RX0                     */                          
+  .word     CAN1_RX1_IRQHandler               /* CAN1 RX1                     */                          
+  .word     CAN1_SCE_IRQHandler               /* CAN1 SCE                     */                          
+  .word     EXTI_IRQHandler                /* External Line[9:5]s          */
+  .word     TIM1_BRK_TIM9_IRQHandler          /* TIM1 Break and TIM9          */         
+  .word     TIM1_UP_TIM10_IRQHandler          /* TIM1 Update and TIM10        */         
+  .word     TIM1_TRG_COM_TIM11_IRQHandler     /* TIM1 Trigger and Commutation and TIM11 */
+  .word     TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */                          
+  .word     TIM2_IRQHandler                   /* TIM2                         */                   
+  .word     TIM3_IRQHandler                   /* TIM3                         */                   
+  .word     TIM4_IRQHandler                   /* TIM4                         */                   
+  .word     I2C1_EV_IRQHandler                /* I2C1 Event                   */                          
+  .word     I2C1_ER_IRQHandler                /* I2C1 Error                   */                          
+  .word     I2C2_EV_IRQHandler                /* I2C2 Event                   */                          
+  .word     I2C2_ER_IRQHandler                /* I2C2 Error                   */                            
+  .word     SPI1_IRQHandler                   /* SPI1                         */                   
+  .word     SPI2_IRQHandler                   /* SPI2                         */                   
+  .word     USART1_IRQHandler                 /* USART1                       */                   
+  .word     USART2_IRQHandler                 /* USART2                       */                   
+  .word     USART3_IRQHandler                 /* USART3                       */                   
+  .word     EXTI_IRQHandler              /* External Line[15:10]s        */
+  .word     RTC_Alarm_IRQHandler              /* RTC Alarm (A and B) through EXTI Line */                 
+  .word     OTG_FS_WKUP_IRQHandler            /* USB OTG FS Wakeup through EXTI line */                       
+  .word     TIM8_BRK_TIM12_IRQHandler         /* TIM8 Break and TIM12         */         
+  .word     TIM8_UP_TIM13_IRQHandler          /* TIM8 Update and TIM13        */         
+  .word     TIM8_TRG_COM_TIM14_IRQHandler     /* TIM8 Trigger and Commutation and TIM14 */
+  .word     TIM8_CC_IRQHandler                /* TIM8 Capture Compare         */                          
+  .word     DMA1_Stream7_IRQHandler           /* DMA1 Stream7                 */                          
+  .word     FSMC_IRQHandler                   /* FSMC                         */                   
+  .word     SDIO_IRQHandler                   /* SDIO                         */                   
+  .word     TIM5_IRQHandler                   /* TIM5                         */                   
+  .word     SPI3_IRQHandler                   /* SPI3                         */                   
+  .word     UART4_IRQHandler                  /* UART4                        */                   
+  .word     UART5_IRQHandler                  /* UART5                        */                   
+  .word     TIM6_DAC_IRQHandler               /* TIM6 and DAC1&2 underrun errors */                   
+  .word     TIM7_IRQHandler                   /* TIM7                         */
+  .word     DMA2_Stream0_IRQHandler           /* DMA2 Stream 0                */                   
+  .word     DMA2_Stream1_IRQHandler           /* DMA2 Stream 1                */                   
+  .word     DMA2_Stream2_IRQHandler           /* DMA2 Stream 2                */                   
+  .word     DMA2_Stream3_IRQHandler           /* DMA2 Stream 3                */                   
+  .word     DMA2_Stream4_IRQHandler           /* DMA2 Stream 4                */                   
+  .word     ETH_IRQHandler                    /* Ethernet                     */                   
+  .word     ETH_WKUP_IRQHandler               /* Ethernet Wakeup through EXTI line */                     
+  .word     CAN2_TX_IRQHandler                /* CAN2 TX                      */                          
+  .word     CAN2_RX0_IRQHandler               /* CAN2 RX0                     */                          
+  .word     CAN2_RX1_IRQHandler               /* CAN2 RX1                     */                          
+  .word     CAN2_SCE_IRQHandler               /* CAN2 SCE                     */                          
+  .word     OTG_FS_IRQHandler                 /* USB OTG FS                   */                   
+  .word     DMA2_Stream5_IRQHandler           /* DMA2 Stream 5                */                   
+  .word     DMA2_Stream6_IRQHandler           /* DMA2 Stream 6                */                   
+  .word     DMA2_Stream7_IRQHandler           /* DMA2 Stream 7                */                   
+  .word     USART6_IRQHandler                 /* USART6                       */                    
+  .word     I2C3_EV_IRQHandler                /* I2C3 event                   */                          
+  .word     I2C3_ER_IRQHandler                /* I2C3 error                   */                          
+  .word     OTG_HS_EP1_OUT_IRQHandler         /* USB OTG HS End Point 1 Out   */                   
+  .word     OTG_HS_EP1_IN_IRQHandler          /* USB OTG HS End Point 1 In    */                   
+  .word     OTG_HS_WKUP_IRQHandler            /* USB OTG HS Wakeup through EXTI */                         
+  .word     OTG_HS_IRQHandler                 /* USB OTG HS                   */                   
+  .word     DCMI_IRQHandler                   /* DCMI                         */                   
+  .word     CRYP_IRQHandler                   /* CRYP crypto                  */                   
+  .word     HASH_RNG_IRQHandler               /* Hash and Rng                 */
+  .word     FPU_IRQHandler                    /* FPU                          */
+                         
+                         
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+  
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+  
+   .weak      MemManage_Handler
+   .thumb_set MemManage_Handler,Default_Handler
+  
+   .weak      BusFault_Handler
+   .thumb_set BusFault_Handler,Default_Handler
+
+   .weak      UsageFault_Handler
+   .thumb_set UsageFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      DebugMon_Handler
+   .thumb_set DebugMon_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler              
+  
+   .weak      WWDG_IRQHandler                   
+   .thumb_set WWDG_IRQHandler,Default_Handler      
+                  
+   .weak      PVD_IRQHandler      
+   .thumb_set PVD_IRQHandler,Default_Handler
+               
+   .weak      TAMP_STAMP_IRQHandler            
+   .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+            
+   .weak      RTC_WKUP_IRQHandler                  
+   .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+            
+   .weak      FLASH_IRQHandler         
+   .thumb_set FLASH_IRQHandler,Default_Handler
+                  
+   .weak      RCC_IRQHandler      
+   .thumb_set RCC_IRQHandler,Default_Handler
+                  
+   .weak      EXTI_IRQHandler
+   .thumb_set EXTI_IRQHandler,Default_Handler
+                  
+   .weak      EXTI_IRQHandler
+   .thumb_set EXTI_IRQHandler,Default_Handler
+                     
+   .weak      EXTI_IRQHandler
+   .thumb_set EXTI_IRQHandler,Default_Handler
+                 
+   .weak      EXTI_IRQHandler
+   .thumb_set EXTI_IRQHandler,Default_Handler
+                        
+   .weak      EXTI_IRQHandler
+   .thumb_set EXTI_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream0_IRQHandler               
+   .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+         
+   .weak      DMA1_Stream1_IRQHandler               
+   .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream2_IRQHandler               
+   .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream3_IRQHandler               
+   .thumb_set DMA1_Stream3_IRQHandler,Default_Handler 
+                 
+   .weak      DMA1_Stream4_IRQHandler              
+   .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream5_IRQHandler               
+   .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream6_IRQHandler               
+   .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      ADC_IRQHandler      
+   .thumb_set ADC_IRQHandler,Default_Handler
+               
+   .weak      CAN1_TX_IRQHandler   
+   .thumb_set CAN1_TX_IRQHandler,Default_Handler
+            
+   .weak      CAN1_RX0_IRQHandler                  
+   .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+                           
+   .weak      CAN1_RX1_IRQHandler                  
+   .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+            
+   .weak      CAN1_SCE_IRQHandler                  
+   .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+            
+   .weak      EXTI9_5_IRQHandler   
+   .thumb_set EXTI9_5_IRQHandler,Default_Handler
+            
+   .weak      TIM1_BRK_TIM9_IRQHandler            
+   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+            
+   .weak      TIM1_UP_TIM10_IRQHandler            
+   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+      
+   .weak      TIM1_TRG_COM_TIM11_IRQHandler      
+   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+      
+   .weak      TIM1_CC_IRQHandler   
+   .thumb_set TIM1_CC_IRQHandler,Default_Handler
+                  
+   .weak      TIM2_IRQHandler            
+   .thumb_set TIM2_IRQHandler,Default_Handler
+                  
+   .weak      TIM3_IRQHandler            
+   .thumb_set TIM3_IRQHandler,Default_Handler
+                  
+   .weak      TIM4_IRQHandler            
+   .thumb_set TIM4_IRQHandler,Default_Handler
+                  
+   .weak      I2C1_EV_IRQHandler   
+   .thumb_set I2C1_EV_IRQHandler,Default_Handler
+                     
+   .weak      I2C1_ER_IRQHandler   
+   .thumb_set I2C1_ER_IRQHandler,Default_Handler
+                     
+   .weak      I2C2_EV_IRQHandler   
+   .thumb_set I2C2_EV_IRQHandler,Default_Handler
+                  
+   .weak      I2C2_ER_IRQHandler   
+   .thumb_set I2C2_ER_IRQHandler,Default_Handler
+                           
+   .weak      SPI1_IRQHandler            
+   .thumb_set SPI1_IRQHandler,Default_Handler
+                        
+   .weak      SPI2_IRQHandler            
+   .thumb_set SPI2_IRQHandler,Default_Handler
+                  
+   .weak      USART1_IRQHandler      
+   .thumb_set USART1_IRQHandler,Default_Handler
+                     
+   .weak      USART2_IRQHandler      
+   .thumb_set USART2_IRQHandler,Default_Handler
+                     
+   .weak      USART3_IRQHandler      
+   .thumb_set USART3_IRQHandler,Default_Handler
+                  
+   .weak      EXTI15_10_IRQHandler               
+   .thumb_set EXTI15_10_IRQHandler,Default_Handler
+               
+   .weak      RTC_Alarm_IRQHandler               
+   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+            
+   .weak      OTG_FS_WKUP_IRQHandler         
+   .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+            
+   .weak      TIM8_BRK_TIM12_IRQHandler         
+   .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+         
+   .weak      TIM8_UP_TIM13_IRQHandler            
+   .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+         
+   .weak      TIM8_TRG_COM_TIM14_IRQHandler      
+   .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+      
+   .weak      TIM8_CC_IRQHandler   
+   .thumb_set TIM8_CC_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream7_IRQHandler               
+   .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+                     
+   .weak      FSMC_IRQHandler            
+   .thumb_set FSMC_IRQHandler,Default_Handler
+                     
+   .weak      SDIO_IRQHandler            
+   .thumb_set SDIO_IRQHandler,Default_Handler
+                     
+   .weak      TIM5_IRQHandler            
+   .thumb_set TIM5_IRQHandler,Default_Handler
+                     
+   .weak      SPI3_IRQHandler            
+   .thumb_set SPI3_IRQHandler,Default_Handler
+                     
+   .weak      UART4_IRQHandler         
+   .thumb_set UART4_IRQHandler,Default_Handler
+                  
+   .weak      UART5_IRQHandler         
+   .thumb_set UART5_IRQHandler,Default_Handler
+                  
+   .weak      TIM6_DAC_IRQHandler                  
+   .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+               
+   .weak      TIM7_IRQHandler            
+   .thumb_set TIM7_IRQHandler,Default_Handler
+         
+   .weak      DMA2_Stream0_IRQHandler               
+   .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+               
+   .weak      DMA2_Stream1_IRQHandler               
+   .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream2_IRQHandler               
+   .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream3_IRQHandler               
+   .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream4_IRQHandler               
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+            
+   .weak      ETH_IRQHandler      
+   .thumb_set ETH_IRQHandler,Default_Handler
+                  
+   .weak      ETH_WKUP_IRQHandler                  
+   .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+            
+   .weak      CAN2_TX_IRQHandler   
+   .thumb_set CAN2_TX_IRQHandler,Default_Handler
+                           
+   .weak      CAN2_RX0_IRQHandler                  
+   .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+                           
+   .weak      CAN2_RX1_IRQHandler                  
+   .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+                           
+   .weak      CAN2_SCE_IRQHandler                  
+   .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+                           
+   .weak      OTG_FS_IRQHandler      
+   .thumb_set OTG_FS_IRQHandler,Default_Handler
+                     
+   .weak      DMA2_Stream5_IRQHandler               
+   .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream6_IRQHandler               
+   .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream7_IRQHandler               
+   .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+                  
+   .weak      USART6_IRQHandler      
+   .thumb_set USART6_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_EV_IRQHandler   
+   .thumb_set I2C3_EV_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_ER_IRQHandler   
+   .thumb_set I2C3_ER_IRQHandler,Default_Handler
+                        
+   .weak      OTG_HS_EP1_OUT_IRQHandler         
+   .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+               
+   .weak      OTG_HS_EP1_IN_IRQHandler            
+   .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+               
+   .weak      OTG_HS_WKUP_IRQHandler         
+   .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+            
+   .weak      OTG_HS_IRQHandler      
+   .thumb_set OTG_HS_IRQHandler,Default_Handler
+                  
+   .weak      DCMI_IRQHandler            
+   .thumb_set DCMI_IRQHandler,Default_Handler
+                     
+   .weak      CRYP_IRQHandler            
+   .thumb_set CRYP_IRQHandler,Default_Handler
+               
+   .weak      HASH_RNG_IRQHandler                  
+   .thumb_set HASH_RNG_IRQHandler,Default_Handler   
+
+   .weak      FPU_IRQHandler                  
+   .thumb_set FPU_IRQHandler,Default_Handler  
+
+/*******************   (C)   COPYRIGHT   2011   STMicroelectronics   *****END   OF   FILE****/

+ 183 - 0
projects/gcc/stm32_flash.ld

@@ -0,0 +1,183 @@
+/*
+*****************************************************************************
+**
+**  File        : stm32_flash.ld
+**
+**  Abstract    : Linker script for STM32F407VG Device with
+**                512KByte FLASH, 192KByte RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Environment : Atollic TrueSTUDIO(R)
+**
+**  Distribution: The file is distributed �as is,� without any warranty
+**                of any kind.
+**
+**  (c)Copyright Atollic AB.
+**  You may use this file as-is or modify it according to the needs of your
+**  project. Distribution of this file (unmodified or modified) is not
+**  permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
+**  rights to distribute the assembled, compiled & linked contents of this
+**  file as part of an application binary file, provided that it is built
+**  using the Atollic TrueSTUDIO(R) toolchain.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x2001ffff;    /* end of 128K RAM on AHB bus*/
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x800;      /* required amount of heap  */
+_Min_Stack_Size = 0x100; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+  BOOTLOADER_P1 (rx) : ORIGIN = 0x08000000, LENGTH = 16K
+  SETTINGS      (rx) : ORIGIN = 0x08004000, LENGTH = 16K
+  BOOTLOADER    (rx) : ORIGIN = 0x08008000, LENGTH = 96K
+  FLASH         (rx) : ORIGIN = 0x08020000, LENGTH = 640K
+  RAM          (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
+  MEMORY_B1     (rx) : ORIGIN = 0x10000000, LENGTH = 64K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >BOOTLOADER_P1
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+    _exit = .;
+  } >BOOTLOADER
+
+
+   .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >BOOTLOADER
+    .ARM : {
+    __exidx_start = .;
+      *(.ARM.exidx*)
+      __exidx_end = .;
+    } >BOOTLOADER
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >BOOTLOADER
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >BOOTLOADER
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    /* _fini = .;  */
+    KEEP (*(.fini_array*))
+    KEEP (*(SORT(.fini_array.*)))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >BOOTLOADER
+
+  /* used by the startup to initialize data */
+  _sidata = .;
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : AT ( _sidata )
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM
+
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(4);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(4);
+  } >RAM
+  
+  /* MEMORY_bank1 section, code must be located here explicitly            */
+  /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
+  .memory_b1_text :
+  {
+    *(.mb1text)        /* .mb1text sections (code) */
+    *(.mb1text*)       /* .mb1text* sections (code)  */
+    *(.mb1rodata)      /* read-only data (constants) */
+    *(.mb1rodata*)
+  } >MEMORY_B1
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+  
+  .settings :
+  {
+    . = ALIGN(4);
+    FILL(0xFF);
+    . = ORIGIN(SETTINGS) + LENGTH(SETTINGS) - 1;
+    BYTE(0xFF)
+  } >SETTINGS
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}