| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273 |
- /*****************************************************************************
- * | File : Readme_EN.txt
- * | Author : Waveshare team
- * | Function : Help with use
- * | Info :
- *----------------
- * | This version: V1.0
- * | Date : 07/01/2020
- * | Info : Here is an English version of the documentation for your quick use.
- * | Configuration oled_demo.ioc
- * | STM32CubeMX 5.6.1
- * | MCU STM32F103RBTx
- ******************************************************************************/
- PERIPHERALS MODES FUNCTIONS PINS
- I2C1 I2C I2C1_SCL PB8
- I2C1 I2C I2C1_SDA PB9
- RCC Crystal/Ceramic Resonator RCC_OSC_IN PD0-OSC_IN
- RCC Crystal/Ceramic Resonator RCC_OSC_OUT PD1-OSC_OUT
- SPI1 Full-Duplex Master SPI1_MISO PA6
- SPI1 Full-Duplex Master SPI1_MOSI PA7
- SPI1 Full-Duplex Master SPI1_SCK PA5
- SYS Serial Wire SYS_JTCK-SWCLK PA14
- SYS Serial Wire SYS_JTMS-SWDIO PA13
- SYS SysTick SYS_VS_Systick VP_SYS_VS_Systick
- USART2 Asynchronous USART2_RX PA3
- USART2 Asynchronous USART2_TX PA2
- Pin Nb PINs FUNCTIONs LABELs
- 5 PD0-OSC_IN RCC_OSC_IN
- 6 PD1-OSC_OUT RCC_OSC_OUT
- 16 PA2 USART2_TX
- 17 PA3 USART2_RX
- 21 PA5 SPI1_SCK SPI1_SCK
- 22 PA6 SPI1_MISO SPI1_MISO
- 23 PA7 SPI1_MOSI SPI1_MOSI
- 37 PC6 GPIO_Output IIC_SCL_SOFT
- 39 PC8 GPIO_Output IIC_SDA_SOFT
- 41 PA8 GPIO_Output OLED_DC
- 42 PA9 GPIO_Output OLED_RST
- 46 PA13 SYS_JTMS-SWDIO
- 49 PA14 SYS_JTCK-SWCLK
- 58 PB6 GPIO_Output OLED_CS
- 61 PB8 I2C1_SCL I2C1_SCL
- 62 PB9 I2C1_SDA I2C1_SDA
- SOFTWARE PROJECT
- Project Settings :
- Project Name : oled_demo
- Project Folder : E:\project\1.3inch OLED Module (C)\1.3inch_OLED_Module(C)_code\STM32
- Toolchain / IDE : MDK-ARM V5.27
- Firmware Package Name and Version : STM32Cube FW_F1 V1.8.0
- Code Generation Settings :
- STM32Cube MCU packages and embedded software packs : Copy all used libraries into the project folder
- Generate peripheral initialization as a pair of '.c/.h' files per peripheral : Yes
- Backup previously generated files when re-generating : No
- Delete previously generated files when not re-generated : Yes
- Set all free pins as analog (to optimize the power consumption) : No
- Toolchains Settings :
- Compiler Optimizations :
|
