tuber/doc/OLED_Module_Code/Arduino/OLED_1in27_rgb/OLED_Driver.cpp

/*****************************************************************************
* | File      	:   OLED_Driver.cpp
* | Author      :   Waveshare team
* | Function    :   1.27inch RGB OLED Module Drive function
* | Info        :
*----------------
* |	This version:   V1.0
* | Date        :   2023-04-15
* | Info        :
* -----------------------------------------------------------------------------
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to  whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#include "OLED_Driver.h"
#include "stdio.h"

/*******************************************************************************
function:
            Hardware reset
*******************************************************************************/
static void OLED_Reset(void)
{
    OLED_RST_1;
    Driver_Delay_ms(100);
    OLED_RST_0;
    Driver_Delay_ms(100);
    OLED_RST_1;
    Driver_Delay_ms(100);
}

/*******************************************************************************
function:
            Write register address and data
*******************************************************************************/
static void OLED_WriteReg(uint8_t Reg)
{

#if USE_SPI_4W
    OLED_DC_0;
    OLED_CS_0;
    SPI4W_Write_Byte(Reg);
    OLED_CS_1;
#endif
}

static void OLED_WriteData(uint8_t Data)
{   
#if USE_SPI_4W
    OLED_DC_1;
    OLED_CS_0;
    SPI4W_Write_Byte(Data);
    OLED_CS_1;
#endif
}

/*******************************************************************************
function:
        Common register initialization
*******************************************************************************/
static void OLED_InitReg(void)
{
    OLED_WriteReg(0xfd);    // command lock
    OLED_WriteData(0x12);
    OLED_WriteReg(0xfd);    // command lock
    OLED_WriteData(0xB1);

    OLED_WriteReg(0xae);    // display off
    OLED_WriteReg(0xa4);    // Normal Display mode

    OLED_WriteReg(0x15);    // set column address
    OLED_WriteData(0x00);   // column address start 00
    OLED_WriteData(0x7f);   // column address end 127
    OLED_WriteReg(0x75);    // set row address
    OLED_WriteData(0x00);   // row address start 00
    OLED_WriteData(0x5f);   // row address end 96

    OLED_WriteReg(0xB3);
    OLED_WriteData(0xF1);

    OLED_WriteReg(0xCA);  
    OLED_WriteData(0x7F);

    OLED_WriteReg(0xa0);    // set re-map & data format
    OLED_WriteData(0x74);   // Horizontal address increment

    OLED_WriteReg(0xa1);    // set display start line
    OLED_WriteData(0x60);   // start 96 line

    OLED_WriteReg(0xa2);    // set display offset
    OLED_WriteData(0x00);

    OLED_WriteReg(0xAB);  
    OLED_WriteReg(0x01);  

    OLED_WriteReg(0xB4);  
    OLED_WriteData(0xA0);   
    OLED_WriteData(0xB5);  
    OLED_WriteData(0x55);    

    OLED_WriteReg(0xC1);  
    OLED_WriteData(0xC8); 
    OLED_WriteData(0x80);
    OLED_WriteData(0xC0);

    OLED_WriteReg(0xC7);  
    OLED_WriteData(0x0F);

    OLED_WriteReg(0xB1);  
    OLED_WriteData(0x32);

    OLED_WriteReg(0xB2);  
    OLED_WriteData(0xA4);
    OLED_WriteData(0x00);
    OLED_WriteData(0x00);

    OLED_WriteReg(0xBB);  
    OLED_WriteData(0x17);

    OLED_WriteReg(0xB6);
    OLED_WriteData(0x01);

    OLED_WriteReg(0xBE);
    OLED_WriteData(0x05);

    OLED_WriteReg(0xA6);
}

/********************************************************************************
function:
            initialization
********************************************************************************/
void OLED_1in27_rgb_Init(void)
{
    // Hardware reset
    OLED_Reset();

    // Set the initialization register
    OLED_InitReg();
    Driver_Delay_ms(200);

    // Turn on the OLED display
    OLED_WriteReg(0xAF);
}

/********************************************************************************
function:
            Clear screen
********************************************************************************/
void OLED_1in27_rgb_Clear(void)
{
    UWORD i;

    OLED_WriteReg(0x15);
    OLED_WriteData(0);
    OLED_WriteData(127);
    OLED_WriteReg(0x75);
    OLED_WriteData(0);
    OLED_WriteData(95);
    // fill!
    OLED_WriteReg(0x5C);

    for(i=0; i<OLED_1in27_RGB_WIDTH*OLED_1in27_RGB_HEIGHT*2; i++){
        OLED_WriteData(0x00);
    }
}

/********************************************************************************
function:   Draw a point
********************************************************************************/
void OLED_1in27_rgb_Set_Point(UBYTE Xpoint, UBYTE Ypoint, UWORD Color)
{
    OLED_WriteReg(0x15);
    OLED_WriteData(Xpoint);
    OLED_WriteData(Xpoint);
    OLED_WriteReg(0x75);
    OLED_WriteData(Ypoint);
    OLED_WriteData(Ypoint);
    // fill!
    OLED_WriteReg(0x5C);   
    
    OLED_WriteData(Color>>8);
    OLED_WriteData(Color);
}

/********************************************************************************
function:   Update all memory to OLED
********************************************************************************/
void OLED_1in27_rgb_Display(const UBYTE *Image)
{
    UWORD i, j, temp;

    OLED_WriteReg(0x15);
    OLED_WriteData(0);
    OLED_WriteData(127);
    OLED_WriteReg(0x75);
    OLED_WriteData(0);
    OLED_WriteData(95);
    // fill!
    OLED_WriteReg(0x5C);   
    
    for(i=0; i<OLED_1in27_RGB_HEIGHT; i++)
        for(j=0; j<OLED_1in27_RGB_WIDTH*2; j++)
        {
            temp = Image[j + i*256];
            OLED_WriteData(temp);
			
        }
}

/********************************************************************************
function:   Update all memory to OLED
********************************************************************************/
void OLED_1in27_rgb_Display_Part(const UBYTE *Image, UBYTE Xstart, UBYTE Ystart, UBYTE Xend, UBYTE Yend)
{
    UWORD i, j, temp;

    OLED_WriteReg(0x15);
    OLED_WriteData(Xstart);
    OLED_WriteData(Xend-1);
    OLED_WriteReg(0x75);
    OLED_WriteData(Ystart);
    OLED_WriteData(Yend-1);
    // fill!
    OLED_WriteReg(0x5C);   
    
    for(i=0; i<Yend-Ystart; i++)
        for(j=0; j<(Xend-Xstart)*2; j++)
        {
            temp = pgm_read_byte(&Image[j + i*(Xend-Xstart)*2]);
            OLED_WriteData(temp);
        }
}