/*****************************************************************************
* | File      	:   OLED_1in32.c
* | Author      :   Waveshare team
* | Function    :   1.32inch OLED Module Drive function
* | Info        :
*----------------
* |	This version:   V1.0
* | Date        :   2023-03-03
* | Info        :
* -----------------------------------------------------------------------------
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to  whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#include "OLED_1in32.h"
#include "stdio.h"

/*******************************************************************************
function:
            Hardware reset
*******************************************************************************/
static void OLED_Reset(void)
{
    OLED_RST_1;
    DEV_Delay_ms(100);
    OLED_RST_0;
    DEV_Delay_ms(100);
    OLED_RST_1;
    DEV_Delay_ms(100);
}

/*******************************************************************************
function:
            Write register address and data
*******************************************************************************/
static void OLED_WriteReg(uint8_t Reg)
{
#if USE_SPI
    OLED_DC_0;
    DEV_SPI_WriteByte(Reg);
#elif USE_IIC
    I2C_Write_Byte(Reg,IIC_CMD);
#endif
}

static void OLED_WriteData(uint8_t Data)
{   
#if USE_SPI
    OLED_DC_1;
    DEV_SPI_WriteByte(Data);
#elif USE_IIC
    I2C_Write_Byte(Data,IIC_RAM);
#endif
}

/*******************************************************************************
function:
        Common register initialization
*******************************************************************************/
static void OLED_InitReg(void)
{
    OLED_WriteReg(0xae);    // turn off oled panel

    OLED_WriteReg(0x15);    // set column address
    OLED_WriteReg(0x00);    // start column   0
    OLED_WriteReg(0x7f);    // end column   127

    OLED_WriteReg(0x75);    // set row address
    OLED_WriteReg(0x00);    // start row   0
    OLED_WriteReg(0x7f);    // end row   127

    OLED_WriteReg(0x81);    // set contrast control
    OLED_WriteReg(0x80);

    OLED_WriteReg(0xa0);    // gment remap
    OLED_WriteReg(0x51);    // 51

    OLED_WriteReg(0xa1);    // start line
    OLED_WriteReg(0x00);

    OLED_WriteReg(0xa2);    // display offset
    OLED_WriteReg(0x00);

    OLED_WriteReg(0xa4);    // rmal display
    OLED_WriteReg(0xa8);    // set multiplex ratio
    OLED_WriteReg(0x7f);

    OLED_WriteReg(0xb1);    // set phase leghth
    OLED_WriteReg(0xf1);

    OLED_WriteReg(0xb3);    // set dclk
    OLED_WriteReg(0x00);    // 80Hz:0xc1 90Hz:0xe1   100Hz:0x00   110Hz:0x30 120Hz:0x50   130Hz:0x70     01

    OLED_WriteReg(0xab);    //
    OLED_WriteReg(0x01);    //

    OLED_WriteReg(0xb6);    // set phase leghth
    OLED_WriteReg(0x0f);

    OLED_WriteReg(0xbe);
    OLED_WriteReg(0x0f);

    OLED_WriteReg(0xbc);
    OLED_WriteReg(0x08);

    OLED_WriteReg(0xd5);
    OLED_WriteReg(0x62);

    OLED_WriteReg(0xfd);
    OLED_WriteReg(0x12);

}

/********************************************************************************
function:
            initialization
********************************************************************************/
void OLED_1in32_Init(void)
{
    //Hardware reset
    OLED_Reset();

    //Set the initialization register
    OLED_InitReg();
    DEV_Delay_ms(200);

    //Turn on the OLED display
    OLED_WriteReg(0xAF);
}

/********************************************************************************
function:   Set the display Window(Xstart, Ystart, Xend, Yend)
parameter:
        xStart :   X direction Start coordinates
        Ystart :   Y direction Start coordinates
        Xend   :   X direction end coordinates
        Yend   :   Y direction end coordinates
********************************************************************************/
static void OLED_SetWindow(UBYTE Xstart, UBYTE Ystart, UBYTE Xend, UBYTE Yend)
{
    if((Xstart > OLED_1in32_WIDTH) || (Ystart > OLED_1in32_HEIGHT) ||
       (Xend > OLED_1in32_WIDTH) || (Yend > OLED_1in32_HEIGHT))
        return;

    OLED_WriteReg(0x15);
    OLED_WriteReg(Xstart/2);
    OLED_WriteReg(Xend/2 - 1);

    OLED_WriteReg(0x75);
    OLED_WriteReg(Ystart);
    OLED_WriteReg(Yend - 1);
}

/********************************************************************************
function:
            Clear screen
********************************************************************************/
void OLED_1in32_Clear(void)
{
    UWORD i;
    OLED_SetWindow(0, 0, 128, 96);
    for(i=0; i<OLED_1in32_WIDTH*OLED_1in32_HEIGHT/2; i++){
        OLED_WriteData(0x00);
    }
}

/********************************************************************************
function:   Update all memory to OLED
********************************************************************************/
void OLED_1in32_Display(UBYTE *Image)
{
    UWORD i, j, temp;
    OLED_SetWindow(0, 0, 128, 96);
    for(i=0; i<OLED_1in32_HEIGHT; i++)
        for(j=0; j<OLED_1in32_WIDTH/2; j++)
        {
            temp = Image[j + i*64];
            OLED_WriteData(temp);
        }
}